Replacing a Power Connector on an HP ENVY dv7t-7200 (with Beats Audio)

Standard

HP-Envy-DV7-678222-YD1

Some friends of ours asked me to see if I could repair an HP laptop that was suffering from power problems. The system was prone to lose power even when moved only slightly. In addition, the battery wasn’t able to charge properly and the power LED often flashed different error status codes.

After looking at a repair manual, and the system itself, I concluded that there were three likely causes of this problem: (1) a faulty power connector, (2) a faulty motherboard, or (3) a faulty power button.

The power button seemed to be the least likely cause. If it was bad I would expect it to only be a problem starting up or shutting down the system, but not a problem once the system was powered up and running.

The motherboard was a more likely candidate than the power button. However, since the system does have a separate power connector, which wasn’t soldered onto the board, I figured it was the most likely cause, and also the least expensive to fix.

Continue reading