Within the past couple of months I purchased two Ring video devices to monitor a property. The first device I decided to get was the Ring Video Doorbell 2.
This device can replace an existing doorbell or be installed where there isn’t one. It provides video and audio recording and can be used to record motion events and interact with someone at your door, live and remotely, from a devices using the Ring app, which works on iOS, Android, Mac OS and Windows.
A while back I decided that it would be nice to have our son’s bedroom lamp, white noise machine and humidifier all plugged into Z-Wave automation switches. But I no longer had any free modules and this meant that I’d need to purchase three Z-Wave plug-in modules. That’s not a small cost and would require more room than was available at the outlet or involve a very ugly set of power cables.
To resolve this problem, and also reduce cost, I decided to purchase an Aeotec DSC11 Smart Power Strip. This power strip provides six power outlets with four of them controllable using Z-Wave. The four can also be controlled as a single unit to turn all of them on or off.
This turned out to work well. I have it connected to my Indigo software and also an Aeon Labs Minimote. On the Minimote one button controls only the lamp and another controlls the noise machine and humidifier as a group.
Back in 2013 I moved from using a very good Windows program called mControl for home automation control over to Indigo for Mac OS. mControl worked great for my needs then but I didn’t want to dedicate an additional computer to the home automation and video recording tasks since I usually left my iMac running anyway.
Indigo looked like an excellent choice and over the years and it has indeed proven to be a great software package for home automation control from a Mac. I realized that even though I’ve blogged about some of the things that I’ve done with Indigo I haven’t really mentioned my overall experience with the software.
It’s now on version 7 and though the cost has risen this is largely due to improved software support and the inclusion of the required licensed technology needed to control Z-Wave compatible door locks. Indigo is very extensible; one can find a number of community-built plugins and it also supports scripting via Python.
I wouldn’t recommend it for someone that isn’t very tech savvy; there are other consumer appliances more suitable for basic home usage, but if you want to do anything more than have a few automated tasks (for example, anything that requires a good bit of logic and virtual devices or variables) you’ll need something like Indigo.
At our house I do use a Wink system and it works fine there but it’s not capable of doing much more than running a few automated tasks; consumer appliances (usually cloud-connected) currently don’t offer very much in this realm. But at the apartment I’m still using Indigo and have moved into some more advanced home automation interactions.
With Indigo I now have several actions that are dependent on the status of other devices, virtual devices and variables. I’m also using some Bluetooth proximity detectors to provide additional enhancements and in the past I’ve done some more interesting things that I currently don’t have setup.
I highly encourage anyone with more than a passing interest in home automation, and a Mac that you’re willing to leave powered on all of the time, to look into Indigo. The initial cost may seem high but when you consider the basic cost just to purchase a consumer appliance hub such as Wink or SmartThings, and then potential issues with any of your existing equipment, you may find that the savings aren’t really there in the long run. Indigo works with X10, Insteaon and Z-Wave devices as well as some other devices that don’t use those protocols.
The unit is a Z-Wave device with two clamps, which is typically intended to be used at a breaker box. It wouldn’t have been able to properly sense current flow if I had just placed the clamps around the power cable for the dryer; the clamps need to be over individual wires that are normally within the cable sheath. However, on my dryer the three wires are individually accessible for a few inches before they enter the main sheath and are then covered.
It was just a matter of placing the clamps around two of these cables. Fortunately, as with the washer, our dryer is low-tech and doesn’t draw any power while not in use so setting up the sensing thresholds in Indigo was relatively easy (actually easier than setting up the washer). Though the washer module is not currently working the dryer notifications still continue to work.
Almost a year ago I purchased a Zubie Key, which is a device that can be used to track the location, and monitor the status, of a vehicle through a vehicle’s OBD-II port. This device has a built-in cellular connection and requires a yearly subscription fee of about $100. My motivation at the time was to integrate it into my home automation setup, which I actually did by connecting it to the IFTTT service combined with text message notifications that my home automation software can receive and process.
A year later I am uncertain whether or not I will continue to pay for the service. Mind you, it is not bad and has lived up to my expectations. But with daycare and various other child-related costs I’m not sure that it’s worth (that suddenly more valuable amount of) $100.
I’ve noticed an increasingly more prevalent theme this year. The core theme is the concept of technology that is so ubiquitous and elegant that it appears to work like magic. For most of us that is rarely our experience. Often technology, whether we’re using an electronic tool that performs some physical work, or a piece of software that executes a virtual action, rarely seems like magic.
Some of this is simply due to the fact that most of us have developed a specific level of expectation over time through gradual changes that occur across the span of decades. There are certainly many things that might be perceived as magical to someone from an earlier time, whether it was someone from five hundred years ago or only a decade ago. Perhaps magic, in this context, might be defined as something that is done for you that you didn’t even think about when you made it happen. Like turning on a light switch or opening a door, except the level of interaction is subtler.
Earlier this year I was fortunate to have the opportunity to join a college at a conference where Josh Clark, a user interface design expert, presented along with several other experts. While there we also had the opportunity to speak with him directly at one of the lunches, where he joined our table. Much of our discussion was on this very subject as was his presentation. His topic, of technology functioning like magic, was engaging and, in my opinion, a change heading toward us rather quickly.
I love technology. I enjoy learning about new innovations and gadgets and I have spent several late nights and weekends just tinkering with devices and software, sometimes without a defined goal. Some of those projects were dead ends. Others were successes. I learned from each one.
Yet, over the years, I continue to notice one problem with much of the technology that we have at our disposal.
As part of my recent dive back into home automation I decided it would be cool (and once again practical) to be able to receive an alert that the washing machine has finished washing a load of clothes.
This wasn’t something I blindly jumped into. There is plenty of information on the Web documenting how others have already done this with various home automation setups. As it turns out, at least with our washer, Indigo 6, and an Aeon Labs DSC06106-ZWUS – Z-Wave Smart Energy Switch it can be remarkably easy.