Our run as cord-cutters has come to an end after several years though it wasn’t by choice; the apartment complex where we live has made a fee mandatory that includes the cost of cable and since there’s no point paying for cable and not using it we decided to cut some of the online streaming services that we’ve been using and get a DVR from our cable provider.
Living as cord-cutters for over six years worked great but that’s a post for another time.
I opted to get an X1 DVR from Comcast so we could record shows (we chose to drop Hulu and HBO) that we would have watched via Hulu as well as some other series that we’ve been purchasing through iTunes over the years.
SSD Hard Drive
MacBook Pro (Late 2013, 13.3″ with Retina Display)
SSD Hard Drive
For the more literal folks, I apologize. I realize that a Mac is actually a PC but for the sake of simplicity I added it to the title so everyone would understand what I was trying to do.
I recently needed to transfer a Windows 7 install from a Lenovo notebook over to a MacBook Pro Bootcamp partition. I need to make it clear that this project was not a success. However, I have learned a few things that others will find useful. In addition, had I followed some advice available in a blog post it’s possible that it would have worked. After all, I did succeed in migrating the partition over and it did attempt to boot…
This particular transfer was a bit more challenging due to the fact that both systems use SSD drives. As a result, I couldn’t simply pull a drive and execute more direct partition clones.
Should you be considering such a move then a good place to begin is a blog post by twocanoes titled Migrating a Real PC to Boot Camp with Winclone 4. Basically, this is the advice I did not follow. Now, my reason for not following it wasn’t irrational. I was very concerned that I’d run Sysprep before cloning, only to then discover that it simply wouldn’t work. Perhaps if I hadn’t been trying to do this quickly I could have attempted this while also having a good fallback clone of the partition made BEFORE running Sysprep or any other changes (and it did not turn out quickly – I spent more time trying to make this work than I did simply starting with a fresh Windows 7 Bootcamp install).
So, once again, I’m confident that I could have succeeded in this endeavor had I followed the advice from twocanoes. However, even though I wasted a lot of time I did learn a few valuable things along the way.
As long as we’ve been in our house my wife has needed a proper solution for storing her various craft supplies. Over the years we moved some plastic drawers and spare shelves into the room but they didn’t work well for her purposes. Though many of the containers would hold most of her items they were difficult to keep organized and simply weren’t made for this purpose.
Early this month she decided to purchase The Workbox, which is made by a company named The Original ScrapBox. At first glance some may hesitate on purchasing one because of the cost (around $1,600) but, after seeing it in use, I think my wife made a good choice with this purchase. Note that the above photo of the Workbox does not show the included shelving and storage.
This post isn’t going to cover the full details of assembly or a personal review of The Workbox (afterall, this is my wife’s purchase and not mine). Instead, I just wanted to mention a handful of items that some may consider stumbling blocks or that may not be immediately obvious. Continue reading