We recently dropped DirecTV and switched to using various VOD services along with a Tivo and a Terk HDTVO. Previously, I had an indoor Terk antenna, which was a step up from the flat RCA indoor antenna we had. The Terk HDTVO performs a bit better.

Part of our problem is that we live almost 40 miles from the nearest broadcast towers (in any direction).

I had tried using the Terk in the attic but it couldn’t reliably pickup more than two of the four stations that we would prefer to have. There are several more stations that larger antennas could pickup (and under the proper conditions the Terk is capable of bringing in more stations from time-to-time.).

This weekend I moved the Terk from the attic down to the pole where the DirecTV dish was installed. Granted, it’s only a few feet off the ground so the position isn’t ideal but at this time I consider it better than sticking it off the side of the house. I was able to use the existing RG6, and assuming the dish was properly installed, then the cable is already grounded, as required.

Reception has improved and most channels that we are able to receive have few drop-outs. The “mast” was obviously cobbled together and at some point I may paint the wood gray to make it blend in better. This location may not be its final mount but for now it will work.

One response to “Using a Terk HDTVO Antenna”

Leave a reply to 2014 Year-End Review of Enduring Tech | Press Any Key Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

I’m Mike

Welcome to my blog, which I have maintained for several years, off and on, to share things that I’ve learned from numerous projects and various problem solving escapades. This is my way of giving something back to the online communities that have helped me learn more about a wide variety of topics.