A while back I decided to purchase a Kwikset 910 Z-Wave SmartCode Electronic Touchpad Deadbolt for one of our properties so I could remotely lock and unlock one of the doors there, which is very useful when you’re trying to sell a house or if Terminix decides to just schedule a day for an inspection without actually confirming that you can be at the property on that day. The 910 currently retails for about $130 though you can find less expensive ones, typically used, on eBay (make sure that it includes the Z-Wave radio module).
Normally I would first provide a post with general information about a product like this before diving straight into a tip or modification but I seem to be missing some photos so here it is…
It is possible to use a Kwikset 910 Z-Wave SmartCode Electronic Touchpad Deadbolt without the keypad and provided lock and instead use it with almost any standard deadbolt lock. You will obviously lose the use of the keypad but the lock actuator mechanism and the Z-Wave interface are all located on the part of the lock system that is mounted to the inside part of the door.
Within the past couple of months I purchased two Ring video devices to monitor a property. The first device I decided to get was the Ring Video Doorbell 2.
This device can replace an existing doorbell or be installed where there isn’t one. It provides video and audio recording and can be used to record motion events and interact with someone at your door, live and remotely, from a devices using the Ring app, which works on iOS, Android, Mac OS and Windows.
Back in December I started using a TP-Link SafeStream TL-R600VPN Gigabit Broadband Desktop VPN Router to be able to login to the network at a remote property. It provided most of the functions I needed but unfortunately the client/server mode of the VPN service only supported PPTP. While not every secure it would have been fine for my purposes but unfortunately Apple dropped support for PPTP VPN connections from the newer Mac OS and iOS versions. I was able to purchase a program called Shimo to use PPTP from the Mac but there wasn’t really a good solution for iOS and being able to access the network from my phone was a critical need.
A while back I decided that it would be nice to have our son’s bedroom lamp, white noise machine and humidifier all plugged into Z-Wave automation switches. But I no longer had any free modules and this meant that I’d need to purchase three Z-Wave plug-in modules. That’s not a small cost and would require more room than was available at the outlet or involve a very ugly set of power cables.
To resolve this problem, and also reduce cost, I decided to purchase an Aeotec DSC11 Smart Power Strip. This power strip provides six power outlets with four of them controllable using Z-Wave. The four can also be controlled as a single unit to turn all of them on or off.
This turned out to work well. I have it connected to my Indigo software and also an Aeon Labs Minimote. On the Minimote one button controls only the lamp and another controlls the noise machine and humidifier as a group.
Back in 2013 I moved from using a very good Windows program called mControl for home automation control over to Indigo for Mac OS. mControl worked great for my needs then but I didn’t want to dedicate an additional computer to the home automation and video recording tasks since I usually left my iMac running anyway.
Indigo looked like an excellent choice and over the years and it has indeed proven to be a great software package for home automation control from a Mac. I realized that even though I’ve blogged about some of the things that I’ve done with Indigo I haven’t really mentioned my overall experience with the software.
It’s now on version 7 and though the cost has risen this is largely due to improved software support and the inclusion of the required licensed technology needed to control Z-Wave compatible door locks. Indigo is very extensible; one can find a number of community-built plugins and it also supports scripting via Python.
I wouldn’t recommend it for someone that isn’t very tech savvy; there are other consumer appliances more suitable for basic home usage, but if you want to do anything more than have a few automated tasks (for example, anything that requires a good bit of logic and virtual devices or variables) you’ll need something like Indigo.
At our house I do use a Wink system and it works fine there but it’s not capable of doing much more than running a few automated tasks; consumer appliances (usually cloud-connected) currently don’t offer very much in this realm. But at the apartment I’m still using Indigo and have moved into some more advanced home automation interactions.
With Indigo I now have several actions that are dependent on the status of other devices, virtual devices and variables. I’m also using some Bluetooth proximity detectors to provide additional enhancements and in the past I’ve done some more interesting things that I currently don’t have setup.
I highly encourage anyone with more than a passing interest in home automation, and a Mac that you’re willing to leave powered on all of the time, to look into Indigo. The initial cost may seem high but when you consider the basic cost just to purchase a consumer appliance hub such as Wink or SmartThings, and then potential issues with any of your existing equipment, you may find that the savings aren’t really there in the long run. Indigo works with X10, Insteaon and Z-Wave devices as well as some other devices that don’t use those protocols.
Back at the house the cable modem and router usually operate just fine but every now and then something hangs up and unfortunately it’s not always practical to go by to reset the gear. And asking a friend to do it for me, even when they’re eager to do it, just seems unfair.
So I searched for a device on Amazon.com, as usual, and sure enough someone has a product that is intended for exactly this need. The NetReset NR100US, which cost about $45, can be set to automatically reset the power to both outlets on the device using a set delay between them. It will turn off one outlet for a minute, turn it back on, and then a minute later do the same for the next.