Easy Accessory Power Switch for a 2008 Chevrolet Impala

Standard

I used a dashcam, phone charger and bluetooth adapter in the car for a while but I grew tired of having to manually unplug those devices when not in use or when I turned the car off. Unfortunately, in my 2008 Chevrolet Impala the vehicle would continue to provide power to any plugged in accessories even when the engine was off. Most of these devices are low power but even a dashcam, given enough time, could eventually drain the vehicle batter, especially if the car wasn’t being used for several days.

Re-wiring the electrical system and messing with fuses is beyond my experience so I decided to see if I could find an automotive power strip that would have a built-in power switch and sure enough I was able to find the perfect device.

The EUGIZMO Cigarette Lighter Splitter only costs about $16, offers three DC outlets, four USB power ports, a large power switch for the unit and also a very good visual indicator to show whether or not it is on.

I chose to mount this upside-down, just below the vehicle’s built-in DC power ports. This placement moves most of the power adapters and cables out of the way; whenever I turn the car on or off it’s very easy to just reach down and hit the large power button.

Car-Power-Strip

At first affixing the unit beneath the dash was a bit of the problem as the first type of velcro that I had used simply wasn’t holding and it would often come loose during the day. Eventually I ended up using some VELCRO Exterme Outdoor Strips and it hasn’t come loose since.

Updated 04/18/2018: The splitter and power button continue to work perfectly. In addition, the VELCRO has held; it hasn’t come loose yet. 

Philips 32″ LCD TV (32PFL5322D/37) Won’t Power On, Red LED Flashes 6 Times

Standard

Warning: Based on information provided in several posts, and from talking to friends, it is very possible that you could severely electrocute yourself if you don’t know what you’re doing or if you touch the wrong part of the electronics. If you’re not sure it’s safe to do this then simply don’t. When I replaced the board I was very careful not to touch any components, including the underside of the board I was replacing. Of course, the unit must be unplugged before proceeding and it may be a good idea to let it sit for a couple of days before opening it.

A couple of weeks ago we experienced a power surge from a nearby lightning strike that damaged one HVAC unit along with a few electronics. One of the items that was damaged was our older 32″ Philips LCD TV. This was largely my fault. I used to have a surge protector on that TV but the last one quit working and I forgot to replace it.

When we tried to turn the TV back on it wouldn’t work and I noticed that a red LED, near the power LED, flashed 6 times, stopped, and then flashed the same sequence.

Continue reading